Sony HDCU-5000 Dual Transmission Camera Control Unit
The Sony HDCU-5000 Dual Transmission Camera Control Unit features High camera connectivity with dual optical connector for UHB transmission/3G transmission. The HDCU-5000 has two standard optical connectors for UHB transmission and conventional 3Gbps transmission on the back.
Supports 4K signal output as standard
A 12G-SDI terminal (x4) that supports input/output of 4K signals is provided as standard, and a single 12G-SDI cable can be used to transmit 4K signals to downstream devices. It also supports output with 3G Quad-Link. In addition, by introducing the expansion 12G-SDI interface kit “HKCU-SDI50”, it is possible to support up to 8 outputs.
Supports 4K signal transmission and UHD TRUNK/UHD PTOMPTER by realizing UHB transmission
A new signal transmission system between the camera and CCU has been developed to support UHB (Ultra High Bitrate) transmission, which enables bidirectional transmission of 2 4K signals. By connecting with the multi-format portable camera “HDC-5500” that supports UHB transmission, it supports UHD TRUNK (4K signal transmission from camera to CCU)/UHD PROMPTER (4K signal transmission from CCU to camera) system. We support flexible operation realization according to.
Equipped with various input/output interfaces
In addition to four SDI OUT outputs, four assignable terminals (SDI I/O terminals) that can flexibly assign the number of input/output signals according to field operation are equipped. In addition to being used as the SDI OUT 8 output in the menu settings, it can also be used as the return input, HD prompter input, or HD trunk output. By changing the settings according to the application, you can support various systems.
Supports full IP control
By adding the optional board “HKCU-SFP50”, bidirectional communication of video, audio and intercom with IP (SMPTE ST 2110) becomes possible. IP Tally (TSL UMD V5.0) is supported as standard. In addition, the “Live Element Orchestrator” solution that supports efficient use of IP equipment, the config control software “HZCU-CNFG50” to support the Ember+ protocol, and the SNMP agent software “HZCU-” to support SNMP monitoring It is possible to install “SNMP50” and supports full IP control. In addition, by introducing the ST 2110 interface kit for HFR “HKCU-SFP52”, it also supports HFR output in ST 2110 and supports up to HD 8x speed.
Web menu control function
By entering the IP address of the main unit into the Web browser, you can perform various CCU settings (input/output allocation, output format selection, etc.) and CCU information list monitoring (Optical Level monitoring, error message monitoring).
| CAMERA FIBER | Optical fiber connector x 2 |
| INTERCOM/TALLY/IO PORT |
D-sub 50-pin connector x 1
INTERCOM (PROD/ENG), 4W: 0dBu, RTS: 0dBu, CC: -14dBu, PGM- 3 lines, 0dBu/-20dBu, TALLY (R, G, Y), FLAG |
| RCP/CNU | 8 pin multi-connector x 1 |
| TRUNK | 12 pin x 1 |
| LAN COM | 8 pin x 1 |
| NETWORK TRUNK | 8 pin × 1 |
| SDI I/O 1-4 (3G/HD/SD-SDI) |
BNC × 4
3G-SDI: SMPTE ST424/425 Level-A/B, 0.8Vp-p, 75Ω, 2.970Gbps/2.967Gbps HD -SDI: SMPTE ST292, 0.8Vp-p, 75Ω, 1.485Gbps/1.4835Gbps SD-SDI: SMPTE ST259M, 0.8Vp-p, 75Ω, 270Mbps 3G-SDI/HD-SDI/SD-SDI, character signal switchable„ÄÄ |
| REFERENCE IN/OUT |
BNC x 2, loop-through output
HD: SMPTE ST274, tri-level sync signal, 0.6Vp-p, 75Ω SD: Black burst (NTSC: 0.286Vp-p, 75Ω/PAL: 0.3Vp-p, 75Ω ) Or NTSC 10F-BB |
| Input terminals | |
| AC IN | AC100V/120/ 220-240V x 1 |
| SDI RET 1-4 |
BNC x 4
3G-SDI: SMPTE ST424/425, 2.970Gbps/2.967Gbps HD-SDI: SMPTE ST292, 1.485 Gbps/ 1.4835 Gbps SD-SDI: SMPTE ST259M, 270 MbpsPROMPTER1, PROMPTER2/VBS-RET: BNC×2 1ch setting loop through output, 2ch setting internal 75Ω termination, analog signal, 1.0Vp-p, 75Ω |
| Output terminals | |
| AUDIO OUT CH1, CH2 | XLR3 pin (convex) x 2, 0dBu/-20dBu/+4dBu |
| CHARACTER/SYNC | BNC x 1, VBS, 1Vp-p, 75Ω |
| AES/EBU | BNC x 1, AES /EBU format |
| SDI OUT 1-4 (3G/HD/SD-SDI) |
BNC x 4
3G-SDI: SMPTE ST424/425 Level-A/B, 0.8Vp-p, 75Ω, 2.970Gbps/2.967Gbps HD- SDI: SMPTE ST292, 0.8Vp-p, 75Ω, 1.485Gbps/1.4835Gbps SD-SDI: SMPTE ST259M, 0.8Vp-p, 75Ω, 270Mbps 3G-SDI/HD-SDI/SD-SDI, character signal switchable UHD SDI A, B, E, F (12G/6G/3G/HD-SDI I/O): BNC x 2 12G-SDI: SMPTE ST2082, 0.8Vp-p, 75Ω, 11.88Gbps/11.868Gbps 6G-SDI : SMPTE ST2081, 0.8Vp-p, 75Ω, 5.940Gbps/5.934Gbps 3G-SDI: SMPTE ST424/425 Level-A/B, 0.8Vp-p, 75Ω, 2.970Gbps/2.967Gbps HD-SDI: SMPTE ST292, 0.8 Vp-p, 75Ω, 1.485Gbps/1.4835GbpsUHD SDI C, D, G, H (12G/6G/3G/HD-SDI I/O): BNC x 2 12G-SDI: SMPTE ST2082, 0.8Vp-p , 75Ω, 11.88Gbps/11.868Gbps 6G-SDI: SMPTE ST2081, 0.8Vp-p, 75Ω, 5.940Gbps/5.934Gbps 3G-SDI: SMPTE ST424/425 Level-A/B, 0.8Vp-p, 75Ω, 2.970Gbps /2.967Gbps HD-SDI: SMPTE ST292, 0.8Vp-p, 75Ω, 1.485Gbps/1.4835Gbps |
| General | |
| Power | AC100 / 120/220 – 240V, 50/60 Hz |
| Consumption Current | Up 7A |
| Operating temperature | 5 – 40 ° C |
| Storage temperature | -20 – + 60 ° C |
| Weight | about 19.5 kg |
| Dimensions (width X Height x Depth) | About 480 x 132 x 410 mm (excluding protrusions) |