M3VE
The Dynaudio Professional M3VE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor – the renowned M3A 3-way monitor. Two speakers are powered by a single four channel Lab.gruppen PLM 12k44 amplifier, using the integrated Lake active cross-over between LF and MF, while passively filtering the MF/HF cross-over point.
With Dynaudio ESOTAR² driver technology, M3VE takes over where most other monitor systems give up. Attention to detail, underpinned by a 22Hz – 21kHz frequency response and beyond 133dB SPL, M3VE leaves no room for desire in terms of resolution, range or power.
| System: | 3-way Active Main Monitor |
|---|---|
| Frequency Response (±3dB): | 22Hz – 21kHz |
| Peak SPL 1m, pair (IEC Short Term): | > 133dB peak |
| Amplifier minimum: | 2 x Lab.gruppen PLM10000Q |
| Resonance Frequency: | 24Hz |
| Internal Cabinet Volume: | 145 liters |
| Bass Principle: | Bass reflex |
| Amplifier: | 1/2 Lab-gruppen PLM10000Q (2 channels pr speaker). Preset: M3VE V05 |
| Tweeter: | Esotar² 28mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material |
| Midranges: | 15cm with 75mm diameter pure aluminum wire voice coil, one-piece molded MSP cone |
| Woofer: | Esotar 30cm with 75mm diameter pure copper wire voice-coil, MSP-cone, long stroke |
| Weight: | 65kg |
| Dimensions (WxHxL): | 555 x 775 x 505mm |
| Cabinet: | 25mm MDF, strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer. |
| Crossover: | Woofers/hightone: active dsp-based, in-amp Lake processor. Midrange/tweeter: passive wir air-coils only, low dielectrium capacitors and zero-compression resistors. |
| Model: | 12k44 |
|---|---|
| Number of amplifier channels: | 4 |
| Max out Power per Channel (4 ohms, all channels driven): | 3000W |
| THD + N at 1kHz and 1dB below clipping: | < 0.04 % |
| Dynamic Range: | > 114dB |
| Channel separation (Crosstalk) at 1 kHz: | > 70dB |
| Inputs: | Analog, AES/EBU & Dante |
| Analog Input Sample Rate / Resolution: | 96kHz / 24bit |
| Weight: | 16.5kg (36lbs) |
| Dimensions (W x H x D): | 483 (19″) x 88 (2 U) x 424(16″) |