SKP 300 G3

Flexibility is the outstanding feature of this plug-on transmitter that turns every wired microphone into a freely mobile wireless one. Thank to its phantom powering the SKP 300 G3 can be used with condenser and dynamic microphones alike. With up to 24 parallel frequency banks, switchable transmission power, wireless synchronization via infrared and, last but not least, its sturdy metal housing the SKP 300 G3 is perfectly fit for the demanding professional routine. And a crystal-clear sound is provided by the HDX compander.

Features

  • P48 phantom power for easy use of any cabled mic
  • Plug-on transmitter with XLR-3F connector for quick use, no visual interference of cables
  • Rugged metal housing for rough use
  • Up to 42 MHz switching bandwidth for flexible use at different locations

What’s in the box?

  • 1 SKP 300 G3 plug-on transmitter
  • 2 AA 1.5 V batteries
  • 1 instruction manual
  • 1 supplementary frequency sheet
  • 1 supplementary RF power sheet

Technical Data

  • Frequency range
    806,125 … 809,750 MHz / Japan
    606 … 648 MHz / UK
    823 … 865 MHz
    780 … 822 MHz
    734 … 776 MHz
    626 … 668 MHz
    566 … 608 MHz
    516 … 558 MHz
  • Dimensions
    105 x 43 x 43 mm (4.1 x 1.7 x 1.7 in)
  • Compander
    HDX
    • Audio-XLR connector
      XLR-3 female
    • Frequency response
      80….18000
    • THD, total harmonic distortion
      < 0,9 %
    • Weight
      195 g (6.9 oz)
      700 g
    • Phantom powering
      48 V +/- 2 V
    • Signal-to-noise ratio
      ≥ 120 dBA (@ 1 mV peak deviation)
    • RF frequency range
      516….. 865 MHz
    • RF output power
      10/30 mW
    • Switching bandwidth
      max. 42 MHz
    • Peak deviation
      ±48 kHz
    • Nominal deviation
      ±24 kHz
    • In compliance with
      CE, FCC, IC
    • Operating time
      > 8 h (30mW HF, without PG 48)
    • Modulation
      FM
    • Carrier frequencies
      1680
    • Input voltage range
      mic 1,2 V max